제조사 | EKSPLA UAB |
---|---|
가격 | TBD |
문의 | 02-3461-1103 |
PS5050 model flashlamp driver is designed for flashlamp-pumped lasers and establishes itself as an updated version of PS5010 driver. PS5050 features microprocessor control and back illuminated LCD display where all output parameters of power supply are conveniently displayed. Flashlamp driver comprises one or several charging modules, a discharge and simmer module and a control circuit. Such design allows the unit to be operated with the utmost ease and convenience. The unit is fitted into a 19” standard housing and may be comfortably mounted in your power supply stands. The unit is manufactured in conformity with EN61010 and EN55011 standards. Driver can be remotely controlled through RS‑232 and CAN (Controller Area Network) interface.
Model | PS5050-1 | PS5050-2 | PS5050-3 | PS5050-4 |
---|---|---|---|---|
Number of independent outputs | 1 | |||
Number of charging modules | 1 | 2 | 3 | 4 |
Max. average output power Pavg at 10 Hz PRR 1), 2) | 0.8 kJ/s | 1.6 kJ/s | 2.4 kJ/s | 3.2 kJ/s |
Max charging voltage Uch | 1000-2500 V 3) | |||
Pulse duration | fixed | |||
Max pulse repetition rate | < 150 Hz | |||
Pulse to pulse stability | 0.1 % | |||
Load regulation | 0.1 % | |||
Resolution | 1 V | |||
Ignition pulse voltage | 16 kV 4) | |||
Ignition pulse duration | > 1000 ns | |||
Simmer current options | 0.6 A; 1.2 A | |||
Simmer voltage | <300 V | |||
Striking voltage | <900 V | |||
Protection features | overvolt, overheat, flashlamp breakdown, interlock | |||
Error report | no simmer current, no charge, HV connectors | |||
Remote control | RS-232 / CAN (LAN on request) | |||
Maximum C PFN value | < 240 µF | |||
Mains | Single phase 230 V (-10 %, + 6 %) or 3 phase 380 V (-10 %, +6%) 5) | |||
Power consumption, average | 1.8 kW | 3.2 kW | 4.5 kW | 5.8 kW |
Power consumption, peak | 2 kW | 4 kW | 6 kW | 8 kW |
Operation conditions | ||||
Ambient temperature | from 0 to + 40 °C | |||
Humidity | from 10 to 90 % non-condensing |
Specifications in table are given as reference. We always suggest to optimize power supply by customer’s usage conditions.
Ordering code | Discharge energy | Repetition rate | Maximal charging rate | Voltage | Flashlamp recommended | PFN specifications | ||
---|---|---|---|---|---|---|---|---|
J | Hz | J/s | V | Capacitance, µF | Inductance, µH | Typical pulse duration (FWHM), µs | ||
PS5050-2-60-40-6 | 10.8 | 60 | 648 | 600 | 5×58; 450 Torr | 60 | 40 | 103 |
PS5050-4-30-80-13 | 25.4 | 60 | 1524 | 1300 | 2×5×58; 450 Torr | 40 | 60 | 103 |
PS5050-1-30-60-16 | 38.4 | 10 | 384 | 1600 | 2×5×45; 450 Torr | 30 | 60 | 89 |
PS5050-2-30-60-16 | 38.4 | 20 | 768 | 1600 | 2×5×58; 450 Torr | 30 | 60 | 89 |
PS5050-4-30-60-16 | 38.4 | 50 | 1920 | 1600 | 2×5×58; 450 Torr | 30 | 60 | 89 |
PS5050-3-80-60-11 | 48.4 | 30 | 1452 | 1100 | 5×90; 450 Torr | 80 | 60 | 152 |
PS5050-3-100-80-10 | 50 | 30 | 1500 | 1000 | 5×90; 450 Torr | 100 | 80 | 197 |
PS5050-2-60-100-16 | 76.8 | 10 | 768 | 1600 | 2×5×58; 450 Torr | 60 | 100 | 163 |
PS5050-3-60-100-16 | 76.8 | 20 | 1536 | 1600 | 2×5×58; 450 Torr | 60 | 100 | 163 |
PS5050-3-80-60-14 | 78.4 | 20 | 1568 | 1400 | 5×90; 450 Torr | 80 | 60 | 146 |
PS5050-2-80-180-19 | 144.4 | 10 | 1444 | 1900 | 2×5×75; 450 Torr | 80 | 180 | 264 |
Contact Ekspla if your requirements are different as in this table. We will consult you and make suggestion best matching your requirements.
Customised flashlamp drivers are available upon request.
Depending on customer needs, we can produce flashlamp drivers with specific average charging power, output voltage, pulse duration, repetition rate values or/and specific application areas.