Electronics
PCD-PHR series
High Repetition Rate Pockels Cell Driver
Pulse repetition rate up to 100 kHz
Fast HV rise time <7 ns for 4 kV pulse
HV pulse amplitude up to 4 kV
제조사 EKSPLA UAB
가격 TBD
문의 김길석박사, 하윤미과장 (02-3461-1103)
제품 특징

PCD-PHR series

High Repetition Rate Pockels Cell Driver
  • Pulse repetition rate up to 100 kHz
  • Fast HV rise time <7 ns for 4 kV pulse
  • HV pulse amplitude up to 4 kV

Description

FEATURES

  • Pulse repetition rate up to 100 kHz
  • Fast HV rise time <7 ns for 4 kV pulse
  • HV pulse amplitude up to 4 kV

PCD-PHR has been designed for use in mode-locked lasers for cavity dumping or for Q-switching of solid-state nanosecond lasers. Fast HV (less than 7 ns) edge ensures excellent pre- and post-pulse contrast.

Ability to operate at high pulse repetition rates makes this driver perfect fit for most of diode-pumped nanosecond lasers. For pulse repetition rates up to 10 kHz heatsink is not required.

For high repetition rates the driver should be attached to the heatsink with thermal resistance of at least 0.4 °C/W for room temperature (25 °C) operation.

The driver should be mounted into dielectric box (not provided) providing electrical insulation. Low voltage power supply is required to internal triggering circuit, while tuning of HV power supply voltage.

Specifications

Model 1)PCD-PHR
Maximum high voltage (HV) pulse amplitude4.0 kV
PolarityPositive
HV pulse rise time< 7 ns
HV pulse fall time~2 µs 2)
HV pulse duration180 ns 2)
Maximum HV pulse repetition rate100 kHz
HV pulse jitter< 0.5 ns
External triggering pulse duration requirement100 – 1000 ns
External triggering pulse amplitude requirement3 – 5 V (50 Ω)
External triggering pulse rise and fall time< 10 ns
HV pulse delay35 – 40 ns
External powering requirements:
    high voltage supply0 – 4.0 kV, 9 mA max 3)
    low voltage DC supply9 – 24 V, 500 mA max 3)
Operating temperature0 – 35 °C 4)
Size104 × 52 × 25 mm
  1. Specifications are subject to changes without advance notice. Whether you require a custom design or production quantities for a scientific and/or industrial applications, our team of engineers would welcome the opportunity to discuss your requirements.
  2. Typical value.
  3. Test conditions: PRR=100 kHz, C=6 pF, U=4 kV.
  4. Heatsink temperature should be below 35° C at 100 kHz pulse repetition rate.

Performance