가변파장 레이저
NT230 series
High Energy Broadly Tunable DPSS Lasers
Integrated OPO system
Diode pumped
Ultrabroad tuning range from 192 to 2600 nm
Up to 15 mJ in VIS
At 100 Hz pulse repetition rate
제조사 레이비스
가격 TBD
문의 02-3461-1103
제품 특징

NT230 series

High Energy Broadly Tunable DPSS Lasers
  • Integrated OPO system
  • Diode pumped
  • Ultrabroad tuning range from 192 to 2600 nm
  • Up to 15 mJ in VIS
  • At 100 Hz pulse repetition rate

Features & Applications

FEATURES

  • Integrates DPSS pump laser and OPO into a single housing
  • Hands-free no-gap wavelength tuning from 192 to 2600 nm
  • High, up to 15 mJ pulse energy from OPO
  • 100 Hz pulse repetition rate
  • More than 2 mJ output pulse energy in UV
  • Less than 5 cm⁻¹ linewidth
  • 2 – 5 ns pulse duration
  • Remote control pad
  • PC control via USB port (RS232 is optional) and LabVIEW™ drivers
  • Optional separate output port for 532/1064 nm beam

APPLICATIONS

  • Laser-induced fluorescence
  • Flash photolysis
  • Photobiology
  • Remote sensing
  • Metrology
  • Non-linear spectroscopy

Description & Options

NT230 series lasers deliver high up to 9 mJ energy pulses at 100 Hz pulse repetition rate, tunable over a broad spectral range. Integrated into a single compact housing, the diode pumped Q-switched Nd:YAG laser and Optical Paramteric Oscillator (OPO) offers hands‑free, no-gap tuning from 193 to 2600 nm. With its 100 Hz repetition rate, the NT230 series laser establishes itself as a versatile tool for many laboratory applications, as laser induced fluorescence, flash photolysis, photobiology, metrology, remote sensing, etc.

Due to the innovative diode‑pumped design, NT230 series lasers features maintenance-free laser operation for an extended period of time and improved stability (compared with flash-lamp pumped counterparts).

NT230 series systems can be controlled from a remote control pad or/and a computer using supplied LabVIEW™ drivers. The control pad allows easy control of all parameters and features on a backlit system display that is easy to read even with laser safety eyewear.

Due to DPSS pump source, the laser requires little maintenance. It is cooled by a water-air chiller, which further reduces running costs. An OPO pump energy monitor allows monitoring of pump laser performance. A standard feature includes a separate output port for the 355 nm pump beam.

ACCESSORIES AND OPTIONAL ITEMS

OptionFeatures
-SHTuning range extension in UV range (210 – 405 nm) by second harmonics generation
-SFTuning range extension in 300 – 405 nm range by sum-frequency generation
-SH/SFTuning range extension in 210 – 405 nm range by combining second harmonics and sum-frequency generator outputs for maximum possible pulse energy
-DUVDeep UV option in 192 – 210 nm
-H, -2H1064 nm or 532 nm output via separate port
-FCFiber coupled output in 350 – 2000 nm range
-Attn/FCFiber coupled attenuated output
-SCUSpectral filtering accessory for improved spectral purity of pulses

Specifications

Model 1)NT230-50NT230-100
OPO
Wavelength range
    Signal405 – 710 nm
    Idler710 – 2600 nm
    SH and SF210 – 405 nm 2)
    DUV192 – 210 nm
Pulse energy 3)
    OPO15 mJ9 mJ
    SH and SF 4)2 mJ1.5 mJ
    DUV0.3 mJ0.2 mJ
Pulse repetition rate50 Hz100 Hz
Pulse duration 5)2 – 5 ns
Linewidth 6)< 5 cm-1
Tuning resolution 7)
    Signal1 cm-1
    Idler1 cm-1
    SH/SF/DUV2 cm-1
Polarization
    Signalhorizontal
    Idlervertical
    SH/SFhorizontal
    DUVvertical
OPO beam divergence 8)< 2 mrad
Typical beam diameter 9)4 mm
PUMP LASER
Pump wavelength 10)355 nm
Typical pump pulse energy 11)50 mJ35 mJ
Pulse duration 6)4 – 6 ns at 1064 nm
PHYSICAL CHARACTERISTICS
Unit size (W × L × H)451 × 640 × 152 mm
Power supply size (W × L × H)471 × 391 × 147 mm
External chillerinquire
Umbilical length2.5 m
OPERATING REQUIREMENTS
Coolingexternal chiller
Room temperature15 – 30 °C
Relative humidity20 – 80 % (non-condensing)
Power requirements208 or 240 V AC, single phase 50/60 Hz
Power consumption< 1 kVA
  1. Due to continuous improvement, all specifi-cations are subject to change. Parameters marked typical are illustrative. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 450 nm and for basic system without options.
  2. Separate –SH and –SF options are available.
  3. See tuning curves for typical outputs at other wavelengths.
  4. Measured at 260 nm and 340 nm wavelengths
  5. FWHM measured with photodiode featuring 1 ns rise time and 300 MHz bandwidth oscilloscope.
  6. Linewidth is <8 cm⁻¹ for 210 – 405 nm range.
  7. When wavelength is controlled from PC. When wavelength is controlled from keypad, tuning resolution is 0.1 nm for signal, 1 nm for idler and 0.05 nm for SH, SF and DUV.
  8. Full angle measured at the FWHM level at 450 nm.
  9. Beam diameter is measured at 450 nm at the 1/e2 level and can vary depending on the pump pulse energy.
  10. Separate output port for the 3rd harmonic beam is standard. Output ports for other harmonic are optional.
  11. The pump laser pulse energy will be optimized for best OPO performance and can vary with each unit we manufacture.

Note: Laser must be connected to the mains electricity all the time. If there will be no mains electricity for longer that 1 hour then laser (system) needs warm up for a few hours before switching on.

Performance & Drawings

Ordering information