제조사 | 레이비스 |
---|---|
가격 | TBD |
문의 | 02-3461-1103 |
NL210 series diode pumped Q-switched lasers produce up to 10 mJ at 1000 Hz pulse repetition rate. The laser is designed to produce high intensity, high brightness pulses and is targeted for applications like OPO pumping, nonlinear spectroscopy, material ablation, micromachining, and other tasks.
Employing electro-optical type of the cavity dumping, the master oscillator can produce pulses with a short pulse duration of 3 – 4 ns, the uniform beam profile and low divergence. The M² factor of the beam is typically between 3 – 4. Laser cooling uses a closed loop chiller, thus eliminating the need for external cooling water, and reducing running costs.
Angle-tuned LBO and/or BBO crystals mounted in temperature stabilized heaters are used for optional second, third or fourth harmonic generation. The harmonic separation system is designed to ensure a high spectral purity of radiation directed to separate output ports.
For customer convenience the laser can be controlled from a remote control pad or USB interface. The remote pad allows easy control of all parameters and features a backlit display that is easy to read even wearing laser safety eyewear. Alternatively, the laser can be controlled from a personal computer with supplied software for a Windows™ operating system. LabVIEW™ drivers are supplied as well.
Model | NL210 |
---|---|
MAIN SPECIFICATIONS 1) | |
Pulse energy: | |
at 1064 nm | 10 mJ |
at 532 nm 2) | 5 mJ |
at 355 nm 3) | 3 mJ |
at 266 nm 4) | 1 mJ |
Pulse to pulse energy stability, 5) | |
at 1064 nm | < 1.0 % rms |
at 532 nm 2) | < 2.0 % rms |
at 355 nm 3) | < 2.5 % rms |
at 266 nm 4) | < 4.0 % rms |
Pulse duration 6) | 3 – 4 ns |
Pulse repetition rate | 1000 Hz |
Beam profile | multimode |
Elipticity | 0.9 – 1.1 at 1064 nm |
M2 | < 4 |
Beam divergence 7) | < 2 mrad |
Beam pointing stability, StDev | < 50 µrad |
Polarization | linear, > 95 % |
Typical beam diameter 8) | 2 mm |
Pulse jitter wrt to SYNC OUT, StDev 9) | < 0.5 ns |
Pulse jitter wrt to ext. trigger, StDev 10) | < 0.5 ns |
PHYSICAL CHARACTERISTICS | |
Laser head (W × L × H) | 456 × 1031 × 260 mm |
Power supply unit (W × L × H) | 520 × 400 × 290 mm |
Umbilical length | 3 m |
OPERATING REQUIREMENTS | |
Cooling 11) | Built-in chiller |
Ambient temperature | 18 – 27 °C |
Relative humidity | 20 – 80 % (non-condensing) |
Power requirements | 100 – 240 V AC, single phase, 50/60 Hz |
Power consumption | < 1 kVA |
Note: Laser must be connected to the mains electricity all the time. If there will be no mains electricity for longer that 1 hour then laser (system) needs warm up for a few hours before switching on.