제조사 | 레이비스 |
---|---|
가격 | TBD |
문의 | 02-3461-1103 |
PhotoSonus X is a perfect solution for photoacoustic imaging. It has high output energy of more than 50 mJ at the peak, a broad wavelength tuning range from 665 to 2600 nm.
It operates at 100 Hz pulse repetition rate. This set of parameters is perfect choice for gaining good photoacoustic signal strength and ensuring high data collection rate. Diode pumped laser technology and well-engineered system design ensures reliability and low-cost system maintenance. System comes with one-year warranty.
PhotoSonus X has a fiber bundle connector with safety interlock. Bundle connector adapter and beam size are adapted to fiber bundle input ferule dimensions.
PhotoSonus X can be certified for clinical photoacoustic applications.
MODEL 1) | PhotoSonus X |
---|---|
OPO | |
Wavelength range | |
Signal | 665 – 1064 nm |
Idler (optional) | 1065 – 2600 nm |
OPO output pulse energy 2) | > 50 mJ |
Pulse repetition rate 3) | 100 Hz |
Scanning step | |
Signal (665 –1064 nm) | 0.1 nm |
Idler (1065 – 2600 nm) | 1 nm |
Pulse duration 4) | 2 – 5 ns |
Signal linewidth | < 10 cm-1 |
Typical signal beam diameter (1/e²) 5) | 5 ± 1 mm |
Control interfaces | USB, LAN, RS232 |
PHYSICAL CHARACTERISTICS | |
Cooling | Closed loop air-water cooled 6) |
Unit size (W × L × H) | 551 × 400 × 162 mm |
Power supply size (W × L × H) | 2 units, 471 × 391 × 147 mm each |
Umbilical length, m | 2.5 m |
OPERATING REQUIREMENTS | |
Room temperature | 18 – 27 °C |
Relative humidity | 20 – 80 % (non-condensing) |
Power requirements | 100 – 240 VAC, single phase 50/60 Hz |
Power consumption | < 2 kW |
Note: Laser must be connected to the mains electricity all the time. If there will be no mains electricity for longer that 1 hour then laser (system) needs warm up for a few hours before switching on.